Miniloaders.com, the U.S. importer and distributor of Intrepid Loaders, is including a fifth mannequin to its line of compact wheel loaders with the two,535-pound capability KM180 Tele.
The compact, light-weight loader’s telescoping growth gives 10.8 toes of attain, sufficient to load supplies into trailers and dumpsters or over fences.
The loader’s 43-horsepower Yanmar diesel engine and 4 unbiased hydraulic wheel motors present loads of torque for concurrently lifting and carrying heavy masses.
All features – ahead, reverse, auxiliary hydraulics and growth – are operable within the joystick. A left foot pedal serves because the inching pedal and a proper foot pedal serves because the throttle pedal. A hand throttle permits the operator to set the RPM manually.
Mixed with a hydraulic maintain/detent, Intrepid loaders are nicely fitted to rotary attachments like augers, sweepers, and cutters, the corporate says. A skid steer quick-attach mount plate lets clients use attachments they already personal.
At 10.6 toes lengthy and 59 inches large, the KM180 Tele is simple to move between jobsites. The design locations the operator’s seat on prime of the engine, leading to no tail swing when articulating. In response to Chris Sleurink, proprietor of Intrepid Loaders USA, this zero tail-swing design “considerably improves operator visibility to the rear of the machine.”
An optionally available dual-wheel system can assist enhance stability and cut back floor stress on tough and uneven terrain. This technique locations two wheels on every entrance hub, rising the width of the loader to 75 inches. “For inexperienced trade professionals, it is a huge plus as they search to lower the footprint of heavy equipment on clients’ lawns,” provides Sleurink.
Extra counterweights and a cabin with warmth and air-con can be found choices.
Bought within the U.S. since 2018, Intrepid Loaders can be found nationwide by means of Miniloaders.com’s distribution headquarters in Cincinnati, Ohio and approved vendor community. The compact wheel loaders are constructed by Belgian-based producer Geens Brothers and offered below the Knikmops model in Europe. Different fashions within the lineup embody the KM85, KM100 Tele, KM130 Tele and KM250 Tele.
Intrepid KM180 Tele Specs
- Engine: 43 hp Yanmar (3 cyl. 3TNV86CT)
- Service Weight: 5,000 lbs. (incl. 3x 77 lbs. counterweights)
- Lifting capability: 2,866 lbs. (no counterweights)
- Lifting capability, 20″ in entrance of wheels: 2,535 lbs. (no counterweights)
- Driving velocity: 0-12.5 mph
- Lifting top (hinge level): 130 in. / 10.8 ft.
- Size with out attachment: 127.5 in. / 10.6 ft.
- Width: 59 in.
- Driving hydraulics: 4 unbiased hydraulic wheel-motors
- Work hydraulics: 13.2 GPM / 2600 PSI
